Solar PV Modules
Solar PV Module

Solar PV Module

Description:
LKT Solar solar PV module / photovoltaic cell is an interconnected array of monocrystalline silicon solar cells. The service time can be over 25 years, during which, the power decay is less than 20%.

Features:
1. All raw materials that incorporate the Photovoltaic cells are subjected to the highest quality control in production;
2. All raw materials must pass a rigorous anti-ultraviolet radiation aging test;
3. Strict cross-link test ensures cross-link intensity of 75% to 85%, assuring proper crosslink separation to guarantee a long lifespan;
4. All units designed under precise calculation, minimize the tolerance of power to meet system needs;

Paramenters:

TEM NO  HG-160S HG-165S HG-170S
MONO or POLY Mono Mono Mono
Maximum power (Wp) 160wp 165wp 170wp
Maximum power voltage (V) 35.60 35.60 35.60
Maximum power current (A) 4.49 4.64 4.78
Open circuit voltage (V) 44.0 44.2 44.5
Short circuit current (A) 4.85 5.03 5.15
Number of cells (Pcs) 72
Size of module (mm) 1580×808×50mm( 125×125mm cell)
Maximum system voltage (V)  1000VDC
Temperature coefficients of Isc (%) + 0.1/ ?
Temperature coefficients of Voc (%) -0.38/ ?
Temperature coefficients of Pm (%) -0.47/ ?
Temperature coefficients of Im (%) +0.1/ ?
Temperature coefficients of Vm (%) -0.38/ ?
Temperature Range -40??+85?
Tolerance Wattage (e.g. +/-3%) +/-5%
Surface Maximum Load Capacity 2400Pa
Allowable Hail Load steel ball fall down from 1m height
Weight per piece (kg) 16.2
Junction Box Type (TUV)QC/0506-1
Connectors and Cables Type 2 PfG 1169 1×4mm2    
Length of Cables (mm) 1000mm
Cell Efficiency (%) 15.0% 15.5? 15.9?
Module Efficiency (%) 12.5% 12.9? 13.3?
Output tolerance (%) +/-5%
Frame (Material, Corners, etc.) Aluminum
Standard Test Conditions AM1.5  100mW/cm2  25'C
Service life 2 5 years life and 20years 80% of power
FF (%) ?72%
Packing 2pcs/paper ctn, 20ctns/pallet, 560pcs/40'fcl
TEM NO  HG-175S HG-180S HG-185S
MONO or POLY Mono Mono Mono
Maximum power (Wp) 175wp 180wp 185wp
Maximum power voltage (V) 35.80 36.30 36.50
Maximum power current (A) 4.88 4.96 5.05
Open circuit voltage (V) 44.8 45.2 45.4
Short circuit current (A) 5.26 5.40 5.49
Number of cells (Pcs) 72
Size of module (mm) 1580×808×50mm( 125×125mm cell)
Maximum system voltage (V)  1000VDC
Temperature coefficients of Isc (%) + 0.1/ ?
Temperature coefficients of Voc (%) -0.38/ ?
Temperature coefficients of Pm (%) -0.47/ ?
Temperature coefficients of Im (%) +0.1/ ?
Temperature coefficients of Vm (%) -0.38/ ?
Temperature Range -40??+85?
Tolerance Wattage (e.g. +/-3%) +/-5%
Surface Maximum Load Capacity 2400Pa
Allowable Hail Load steel ball fall down from 1m height
Weight per piece (kg) 16.2
Junction Box Type (TUV)QC/0506-1
Connectors and Cables Type 2 PfG 1169 1×4mm2
Length of Cables (mm) 1000mm
Cell Efficiency (%) 16.4% 16.8% 17.3?
Module Efficiency (%) 13.7? 14.1? 14.5?
Output tolerance (%) +/-5%
Frame (Material, Corners, etc.) Aluminum
Standard Test Conditions AM1.5  100mW/cm2  25'C
Service life 2 5 years life and 20years 80% of power
FF (%) ?72%
Packing 2pcs/paper ctn, 20ctns/pallet, 560pcs/40'fcl
 
 
 
      LKT CORPORATE
      Corporate Home
      Government & Municipal Clients
      Commercial & Private Sector Clients
      Texas Reimbursement Initiative
      LKT Corporate Profile
      Contact
       
      SOLAR PRODUCT OPTIONS
      Small Area / Landscaping Lamps
      Medium Area / Park Lighting Systems
      Large Area / Mass Usage Systems
      Factory Direct Photovolltaic Cell Units
 
 
    DOWNLOAD CENTER
    The Outlook for Photovoltaics in Texas
A comprehensive overview of the Solar Industry in Texas, prepared by the prestigious IC2 Institute of the University of Texas at Austin
    Texas House of Representatives Reports
This report describes the current status of solar energy in Texas and in other states and outlines anticipated policy proposals for incorporating solar energy into Texas’ energy future.
    TREIA Program On Texas Renewables
Texas Power Needs and Renewable Energy 2008 -2030
    Texas Solar Device Exemption Guide
The Guideline contains general policy, definitions of solar and wind-powered energy devices, examples of different device types, and a descrip- tion of the manner in which the tax exemption applies.
    Texas Solar Device Exemption Form
Tax Code Section 11.27 provides an exemption from property tax of the amount of appraised value that arises from the installation or construction of solar or wind- powered energy devices used primarily for production and distribution of energy for “on-site” use.
    DSIRE Complete Solar Policy Guide
Serving as a resource for policy makers and other interested stakeholders, the Policy Guide highlights key policies necessary to facilitate mainstream solar adoption—from reducing upfront equipment costs and streamlicultivating the solar industry and ensuring quality installations.
    Solar Powering Your Community
The complete guide for Local Governments.
    Green Energy Tech for Public Facilities
Municipalities undertaking new construction of Public Buildings can benefit from this exhaustive bulletin.
    The Homebuilder's Guide to Going Solar
Why go solar in your homes?
Simply put, solar makes sense!
When you choose solar options, you:
• Differentiate yourself from other builders
• Save money with shorter sales cycles and less inventory
• Complement your intriguing designs and high-quality construction
• Enhance your image as an environmentally responsible builder.
    Solar Technologies Market Report, '08
The focus of this report is the U.S. solar electricity market, including photovoltaic (PV) and concentrating solar power (CSP) technologies.
 


  | Home | About LKT | Clients | Government Municipal Purchasers | Texas Incentive Program | Contact Us |